AR-15 Scope Mount With Iron Sights Step By Step Guide
When it comes to improving the accuracy and versatility of your AR-15, having the right scope mount with iron sights can make all the difference. With the right equipment, you can easily transition between long-range shooting with a scope and close-quarter combat with iron sights. In this step-by-step guide, we will walk you through the process of installing and zeroing an AR-15 scope mount with iron sights.
Whether you're a seasoned shooter or a novice, this guide will provide you with the knowledge and confidence to effectively enhance the performance of your AR-15 rifle. So, grab your tools and let's get started on maximizing the potential of your firearm.
Required Equipment's for AR-15 Scope Mount with Iron Sights
The required equipment for AR-15 scope mount with iron sights include a scope mount, iron sights, an appropriate size hex wrench, and a screwdriver. The scope mount is essential for attaching the scope to the rifle, while the iron sights provide a secondary aiming option. The hex wrench is needed to secure the scope mount to the rifle, and the screwdriver is necessary for adjusting the iron sights.
With this equipment, shooters can easily mount a scope and have the option of using the iron sights for close-range shooting without having to remove the scope.
Step by Step Guide for Installing Iron Sights
Installing iron sights on an AR15 rifle platform can be crucial for those who prefer traditional sighting systems over optics. To begin, select the appropriate iron sights and a compatible mount for the rifle platform.
- Step 1: Take off any existing attachments on the upper receiver of the AR15 rifle platform, including any optics or other sighting systems.
- Step 2: Install the AR15 vice block onto the upper receiver of the rifle platform. This will stabilize the rifle platform and prevent any harm during setup.
- Step 3: Connect the front sight post to the front of the gas block. Use the Allen wrench to secure the front sight post to the gas block. Ensure it is securely fastened and aligned.
- Step 4: Attach the rear sight to the upper receiver of the rifle platform. Use the Allen wrench to secure the rear sight to the upper receiver. Ensure it is securely fastened and aligned.
- Step 5: After the iron sights are set up, use the bore sighter to align the sights. This will assist in zeroing in the iron sights for improved accuracy.
- Step 6: Apply anti-seize lubricant to the iron sights to prevent corrosion and damage.
By following this step-by-step guide, the installation of iron sights can greatly improve the accuracy and overall usability of the AR15 rifle platform.
Scope installation involves the process of mounting and aligning a scope to a firearm for accurate shooting. This process requires precision and careful attention to detail to ensure that the scope is properly positioned and sighted in with the firearm. The installation typically begins with attaching the scope mount to the firearm, followed by securing the scope onto the mount.
Once the scope is in place, the next step is to align the reticle with the firearm's bore axis to ensure that the point of aim and point of impact coincide. This can be achieved using a bore sighter or by carefully adjusting the windage and elevation turrets on the scope.
Properly installing a scope is essential for achieving consistent and precise shots, whether for hunting, target shooting, or tactical applications. It is important to follow manufacturer instructions and seek professional help if needed to ensure a successful scope installation.
Merging iron sights with a scope
Merging iron sights with a scope can provide shooters with the flexibility to engage targets at varying distances effectively. By combining the close-range accuracy of iron sights with the magnification and precision of a scope, shooters can quickly transition from short to long-range targets without the need to adjust or switch between different sighting systems.
This can be particularly useful for hunting or tactical scenarios where quick and seamless target acquisition is crucial. Additionally, having both iron sights and a scope allows shooters to maintain accuracy in the event of scope malfunction or damage.
However, it's important for shooters to ensure that the iron sights are properly aligned with the scope to avoid any potential sighting inconsistencies.
The AR-15 scope mount with iron sights is a valuable addition to your rifle, providing versatility for short and long-distance shooting.
This step-by-step guide has shown that the installation and zeroing process can be accomplished with a few simple tools and techniques.
By following the instructions carefully, you can ensure that your scope and iron sights are properly aligned, allowing for quick and accurate target acquisition. The added benefit of being able to switch between the scope and iron sights seamlessly makes this setup a practical choice for various shooting scenarios.
Overall, investing in an AR-15 scope mount with iron sights can significantly enhance your rifle's performance and functionality.
Ben Casnocha is an accomplished hunting writer whose passion for the outdoors and wildlife has driven his literary pursuits. With a deep-rooted connection to nature and a keen understanding of the hunting world, Casnocha brings a unique perspective to his writing, blending his experiences in the wilderness with insightful observations.